How to Select the Right Insulation for Your Home Insulation Project

It’s necessary to insulate your home properly. Insulation helps keep the heat in throughout the winter and reduces the heat flow into your home during the summer. A properly insulated house will be warmer in the winter and cooler in the summer, providing a more comfortable environment throughout the year for you and your family and helping to lower your energy bill!

When researching which type of insulation to install in your home, you will find there are three things to consider: content, size and location / application. There are four forms of success-and all of them have both pros and cons.If you wish to learn more about this,read the full info here.

Blanket Insulation Blanket is the most common type of insulation and is available in batts or rolls. The batts and rolls come in different widths and thicknesses. Fiberglass is the most common material to be used in blanket insulation. Various blanket insulation varieties have a facing applied to create an air and/or vapor barrier. Popular facing materials include kraft paper, sheeting in vinyl and foil in aluminium.

The biggest selling point for blanket insulation is that the batts can be built by a homeowner themselves. Installing blanket insulation can be a fairly quick and easy process depending on your home insulation project but there are things you need to look out for. The biggest drawback to installing blanket insulation yourself is that you need protection against the tiny particles of fiberglass. Be sure to wear a mask and something to protect your skin and clothes against those tiny fiberglass fibers while installing blanket insulation, which can be dangerous if they get into your lungs and can irritate your skin.

If you have a non-uniform room it can be difficult to install blanket insulation. Fitting blanket insulation around cabling and plumbing can be time-consuming and can reduce isolation capacity. Such form of insulation is best used on unfinished walls (including foundation walls), floors, and ceilings.

A common application of liquid foam insulation materials is the spray foam insulation spray. The most common way to spray liquid foam insulation is, but it can also be sprayed, poured or foamed on the spot. Polyurethane is the most prevalent material in spray foam insulation. Installation of spray foam insulation typically costs more than isolation from the blankets. Nevertheless, the higher R-value associated with sprayed in foam (a measure of the capacity of the insulation to minimize the heat flow rate) will reduce weatherizing costs and save you money over the life of the insulation.

The biggest selling point for spray foam insulation is that it blends into the construction cavity or room holes, crevices, or gaps. It helps prevent the buildup of moisture (which increases mold and mildew), makes it difficult for pests to find a place to live in your house, and once it’s cured, it won’t shift, settle or fall out of position.

The installation is the biggest drawback of a spray foam. A contractor usually requires the installation of spray foam insulation. If you do it yourself and mount the spray foam improperly, comprehensive clean-up will be needed and your home construction will be undermined in its integrity. Insulation of the spray foam is more costly than other insulation types. Installation of spray foam is ideal for insulating existing finished areas, over obstructions, unfinished attic floors and surrounding exterior walls.

Rigid foam insulation It is possible to use rigid foam insulation (also known as rigid panels) to insulate nearly any part of your house. Rigid foam is more costly and more difficult to install, at a cost per R-value basis, than blanket insulation. The main advantage of rigid foam insulation is that the R-value for small thickness is relatively high. Rigid foam has continuous coverage and offers a barrier between air and moisture which is not offered by blanket insulation. It is easier to install rigid foam than sprinkle foam. It is easy to cut rigid foam to fit with a knife. The major downside of rigid foam is its inflexibility. The rigidity makes installation in small or irregular surfaces difficult. It is best used in unfinished walls, floors, ceilings and low-slope, unventilated roofs.

Loose Fill Insulation Loose fill insulation consists of plastic, foam or other small particles. Unlike spray foam, loose fill insulation is in accordance with the construction area. The cellulose, fiberglass, or mineral wool are the most common materials used.

The greatest advantage of loose fill insulation is that it can be used in areas and cavities which are irregularly formed. It is one of the few types of insulation that can be added to existing finishes with minimal disruption. The biggest drawback is its propensity to settle over time, which induces a decline in R-value. Another downside is its weight. Too much isolation from loose filling can cause a dry wall to sag.